Belt conveyors
Our conveyor components and modules are characterized by a robust and durable construction. They are pre-assembled and, if necessary, pre-wired and equipped with light barriers, control modules and supports. Different drive variants are available.
Belt conveyors BS-GF2020
The belt conveyor is built into a stationary or mobile system. Belt conveyors are used, among other things, for the transport of general cargo (parcels for example) or of bulk goods. Small parts as well as larger objects can be transported.
| Payload | 80 kg/m |
| Ambient temperature | -5 to +50 °C |
| Surrounding area | Production and storage halls |
| Belt width | 200 to 1200 mm (in 50-mm-increments) |
| Conveying length | 500 to 10.000 mm |
| Belt ratio (min.) | 1:1,5 (width to length) |
| Drive diameter | 80 mm (rubber coating on the drive drum possible) |
| Deflection diameter | 80 mm |
| Tilt angle (max.) | 18° |
| Belt design | Various variants possible |
| Power of the drives | 0,12 bis 0,75 kW; connection for 220/240 bis 380/415 V, 50 Hz, protection class IP 54 |
| Speeds (max.) | 90 m/min |
Belt conveyors BS-GF2021
The belt conveyor BS-GF 2021 consists of a centre drive and an internal drive. This is used for the transport of horizontal and inclined conveyed goods as well as during the sequence of machines and systems.
| Track load | Depends on length and width |
| Ambient temperature | -5 to +50 °C |
| Surrounding area | Production and storage halls |
| Belt width | 250 to 1.200 mm (other widths on demand) |
| Conveying lengths | 2.900 to 50.000 mm |
| Belt ratio (min.) | 1:1,5 (width to length) |
| Drive diameter | 215 mm (rubber coating on the drive drum possible) |
| Deflection diameter | 80/133 mm |
| Tilt angle | 18° |
| Belt design | Various variants possible |
| Power of the drives | 0,55 to 4 kW; connection for 220/240 to 380/415 V, 50 Hz protection class IP 54 |
| Speeds (max.) | 4 m/s |